This model is designed for use with easy flow soils that typically do not load well in a traditional scraper. The use of a 10 foot wide cutting blade with extended side edges help to funnel the soil into a shallower bowl and provide for easier loading of this type of material. The direct mount design provides tractor-to-scraper weight transfer while extending the wheel base to achieve smooth even cut control. Pull requirements are based on soil conditions but typically range from 180 – 400 horsepower tractors.
Specifications:
Capacity Heaped: 14 Cubic Yards (10.78 Cubic Meters)
Capacity Struck: 11.5 Cubic Yards (8.86 Cubic Meters)
Width of Cut: 120 Inches (304.8 cm)
Overall Width: 139.5 Inches (354.3 cm)
Depth of Cut: 14.75 Inches (37.78 cm)
Depth of Spread: 0-19 Inches (0-48.3 cm)
Ground Clearance (Cutting Edge): 19.75 Inches (50.17 cm)
Apron Opening: 53 Inches (134.6 cm)
Overall Length: 320 Inches (990.6 cm)
Wheel Base: 274 Inches (696 cm)
Overall Height: 80 Inches (203.2 cm)
Weight: 14,250 Pounds (6464 kg)
Tire Size (Rear) 17.5 x 24 – R4 – 10 Ply
Cutting Blade: 3 Piece AR400 Plate .750 Inches Thick
Hydraulic Specifications:
Requires 3 Hydraulic Circuits (Standard)
Bowl Lift Cylinders: (2) 4-1/2” x 18” Trunion Mount
Front Gate Cylinders: (2) 3-1/2” x 13”
Soil Ejection Cylinders: (2) 3” x 56”
Approximate Tractor Requirements: (Rubber Tired) 180-400 Horse Power
Standard Features:
360 Degree Swivel Hitch
Front Hose Support Pedestal
Front Spoil Side Skirts
Extended Center Cutting Blade
Industrial Hydraulic Cylinders
Hydraulic Laser Mast Mount Pad
Front Gate Cylinder Side Shields
Tire Valve Stem Protectors
Optional Features:
Sequenced Hydraulic Circuit for Front Gate and Ejection
(Requiring only 2 Tractor Circuits)
Straight Across Finish Grade Cutting Blade